Back
to Contents Page
Cable Modem Connection
|
|
NOTE:
|
It
is recommended that you install the Dell Wireless 2350 Broadband Router using the Setup Wizard
provided on the Dell Wireless 2350 Broadband Router CD. Perform the steps below only when you are
unable to install the Dell Wireless 2350 Broadband Router with the Setup Wizard.
|
Cable Modem - Standard Setup
Use this setup when your cable service provider does not require you
to enter any information for your Internet broadband connection.
Cable Modem with
Name Settings
Use this setup when your cable service provider requires you to
enter Host Name and Domain Name for your Internet broadband
connection.
Cable Modem with
Other Settings
Use this setup when your cable service provider requires you to
enter other information.
Cable Modem - Standard Setup
1.
Connect
the Ethernet port on the cable modem to the Internet port on the Dell Wireless 2350
Broadband Router
through an Ethernet cable.
2.
Connect
any one of the four LAN ports on the Dell Wireless 2350
Broadband Router
to the Ethernet
port on your computer through another Ethernet cable.
3.
Turn
on the Dell Wireless 2350
Broadband Router.
|
|
NOTE:
|
If
the installation is not successful, you can restore the default settings by
pushing the Reset button on the back of the Dell Wireless 2350
Broadband Router for at
least 5 seconds. The Dell Wireless 2350 Broadband Router will reboot with the default settings
and the setup will continue.
|
|
|
NOTE:
|
The
Dell Wireless 2350 Broadband Router is configured by default with the following settings:
·
The
cable/DSL interface is configured with the DHCP client enabled. This means it
will try and get its Internet IP address automatically from your ISP.
·
The
Local Area Network and Wireless interfaces are configured with the DHCP
server enabled. This means that the Dell Wireless 2350
Broadband Router will allocated IP addresses to any connect computer
automatically.
·
Default
user name and password is admin. Use this to access the Configuration
Settings on the Dell Wireless 2350
Broadband Router when you browse to http://my.router
This
configuration will work properly with a cable modem provider that does not
require authentication.
|
Back
to Top
Cable Modem with Name Settings
1.
Connect
the Ethernet port on the cable modem to the Internet port on the Dell Wireless 2350
Broadband Router
through an Ethernet cable.
2.
Connect
any one of the four LAN ports on the Dell Wireless 2350
Broadband Router
to the Ethernet
port on your computer through another Ethernet cable.
3.
Turn
on the Dell Wireless 2350
Broadband Router.
4.
Open
your web browser (for example Internet Explorer) and go to http://my.router,
or the default IP address http://192.168.2.1.
5. Enter the
default username and password admin when prompted to do so.
6.
Go
to the Basic Settings
menu option tab on the top navigation bar and wait for the menu to appear.
7.
Click
the Internet Connection Settings menu option on the pull down menu.
8.
Click
to select Your ISP requires you to input Host Computer Name or Domain Name.
9.
Type
the Host Name and Domain Name assigned to you into the
appropriate boxes.
10.
Click
the Next button.
11. Click the Save & Restart button to store the new
settings.
When your web
browser returns to the main page of the Dell Wireless 2350
Broadband Router, the device
will have
successfully restarted with the new settings.
Back to Top
Cable Modem with Other
Settings
If your cable
service provider requires you to enter other settings for your Internet
connection, select only the appropriate boxes in the Internet Connection
Settings nemu option (See Step 6 in Cable Modem with Name Settings) and type the
required values provided by your ISP.
Back to Top
Back
to Contents Page
